773 SeriesTMJoint Repair Clamp — for use on PE-160 PVC pipe solvent weld joints.
The 773 series clamp has a stepped gasket that fits over the solvent weld joint in PE-160 PVC pipe tostop leaksin the joint.
Catalog number | Nominal clamp/pipe size | Clamp length | |
773-06-0238 | 2" | 6" | 12" |
773-07-0289 | 2-1/2" | 7-1/2" | 12" |
773-07-0350 | 3" | 7-1/2" | 12" |
773-07-0450 | 4" | 7-1/2" | 12" |
773-07-0663 | 6" | 7-1/2" | 12" |
733-07-0863 | 8" | 7-1/2" | 12" |
Extra bolts and nuts for 773 series Mueller Single Section Full Seal Repair Clamps
Clampsize | Bolt size | Bolt part number | Nut part number |
2"-3-1/2" | 1/2"x4-1/2" | 521009 | 521010 |
4"-12" (standard nut) | 5/8"x6" | 521008 | 195236 |
Stainless steel bolts
For optional 304 stainless steel bolts, washers and nuts, add “S-” prefix to clamp catalog number.
Example: S-773-06-863.
Deepsocket wrenchs
Specially designed for use with Mueller Full-Seal Repair Clamps. Long ratchet handle has thumb-tip reverse. Deep sockets (3-1/4") have double hex (12 pt.) and 1/2" square drive.
Part number | Description |
515204 | 15-3/4" with reversible ratchet handle |
520344 | 7/8" socket for 2" and3" clamps |
515207 | 1-1/16" socket for 4" and larger clamps |
519575 | 1/2"x3/4"adapter |
IMPORTANT:PIPE REPAIR CLAMP Shave demonstrated their capability to seal against water pressures commonly encountered in distribution systems. Smaller diameter clamps of a given design can seal against higher pressures than larger ones. In addition,the pressure that a clamp can contain depends up on the torque applied to the bolts, the uniformity of bolt tightening (when there is more than one bolt), as well as the type and extent of pipe damage, surface condition of the pipe, environmental conditions, and installation workmanship.