H-619

Mechanical Joint Tapping Sleeve

Catalog number - H-619

Specifications:

4"-12" main and outlet (see chart below for available size combinations).
Specially designed for use on A-C pipe.
Outlet flange drilling complies with ASME/ANSI B16.1 class 125, B16.42 class 150 and with MSS SP-60
Ductile Iron body with 3/4" NPT test plug.
4"-12" sizes--200 psig (1375 kPa/14 barg) maximum working pressure.

Sizes & Operation

Nominal size of main	Outlet size
Nominal size of main	4"	6"	8"	10"	12"
4"	X	-	-	-	-
6"	X	X	-	-	-
8"	X	X	X	-	-
10"	X	X	X	X	-
12"	X	X	X	X	X

NOTE: The actual diameter A-C pipe varies among manufacturers and from piece to piece. It is important to measure the pipe diameter at the point where the sleeve will be installed. The O.D. of A-C pipe can be reduced by following the recommendations of the specific pipe manufacturer.

Parts

Tapping Sleeve Pipe Information

Nominal size of main	O.D. Range of sleeve		Class and type of pipe	End Gasket part number
Nominal size of main	Inch	mm	Class and type of pipe	End Gasket part number
4"	4.97"-5.57"	126.3-141.4	A-C classes 150 & 200	195656
6"	7.05"-7.60"	179.2-192.9	A-C classes 100, 150 & 200	195657
8"	9.22"-9.79"	234.3-248.6	A-C classes 100, 150 & 200	195658
10"	11.77"12.25"	299.1-311.1	A-C classes 150 & 200	194307
12"	14.03"-14.51"	356.5-368.5	A-C classes 150 & 200	194289