J-969
J-969
- Outlet tapped with either AWWA taper (C.C.) or AWWA I.P. thread (F.I.P.T.)
- For use on A-C** pipe, cast iron or ductile iron pipe and cast iron O.D. PVC pipe
- 200 psig (1379 kPa/14 bar) maximum working pressure
- Brass body
- 304L stainless steel straps
- Rolled strap threads
- O-ring sealed outlet
- 3/4" thru 2" tap sizes (1/2" or 5/8" some styles)
- Meets all applicable parts of ANSI/AWWA C800
- NSF 61 Certified
Nominal Pipe Size in Inches | Pipe O.D. Range* |
Thread Type | Tap Size | |||||
Inch | mm | 3/4" Tap Part Number | 1" Tap Part Number | 1-1/4" Tap Part Number | 1-1/2" Tap Part Number | 2" Tap Part Number | ||
4" |
4.74-5.10 |
120.4-129.5 | CC | - | - | 38-1423 | 38-1352 | 38-1353 |
IP | - | - | 38-1418 | 38-1348 | 38-1349 | |||
4.74-5.32 |
120.4-135.1 | CC | 38-1350 | 38-1351 | - | - | - | |
IP | 38-1346 | 38-1347 | - | - | - | |||
5.10-5.40 |
129.5-137.1 | CC | - | - | 38-1424 | 38-1426 | 38-1428 | |
IP | - | - | 38-1425 | 38-1427 | 38-1429 | |||
6" |
6.48-7.45 |
174.0-189.0 | CC | 38-1358 | 38-1359 | 38-1430 | 38-1360 | 38-1361 |
IP | 38-1354 | 38-1355 | 38-1419 | 38-1356 | 38-1357 | |||
8" |
8.99-9.67 |
229.0-245.0 | CC | 38-1366 | 38-1367 | 38-1431 | 38-1368 | 38-1369 |
IP | 38-1362 | 38-1363 | 38-1420 | 38-1364 | 38-1365 | |||
10" |
11.04-12.12 |
281.0-307.0 | CC | 38-1374 | 38-1375 | 38-1432 | 38-1376 | 38-1377 |
IP | 38-1370 | 38-1371 | 38-1421 | 38-1372 | 38-1373 | |||
12" |
13.14-14.58 |
334.0-370.0 | CC | 38-1382 | 38-1383 | 38-1433 | 38-1384 | 38-1385 |
IP | 38-1378 | 38-1379 | 38-1422 | 38-1380 | 38-1381 | |||
14" |
15.22-16.88 |
386.6-428.7 | CC | 38-1434 | 38-1513 | - | 38-1435 | 38-1515 |
IP | 38-1508 | 38-1509 | - | 38-1510 | 38-1511 | |||
16" |
17.32-19.19 |
439.9-487.4 | CC | 38-1520 | 38-1521 | - | 38-1522 | 38-1523 |
IP | 38-1516 | 38-1517 | - | 38-1518 | 38-1519 | |||
18" |
18.00-19.50 |
457.2-495.3 | CC | 38-1730 | 38-1731 | 38-1732 | 38-1733 | 38-1734 |
IP | 38-1735 | 38-1736 | 38-1737 | 38-1738 | 38-1739 | |||
20" |
20.00-21.60 |
508.0-548.6 | CC | 38-1740 | 38-1741 | 38-1742 | 38-1743 | 38-1744 |
IP | 38-1745 | 38-1746 | 38-1747 | 38-1748 | 38-1749 | |||
24" |
24.00-25.80 |
609.6-655.3 | CC | 38-1750 | 38-1751 | 38-1752 | 38-1753 | 38-1754 |
IP | 38-1755 | 38-1756 | 38-1757 | 38-1758 | 38-1759 | |||
*A-C pipe, classes 150-200 per ASTM C295 and AWWA C400 – actual O.D. of pipe being used must fall within the pipe O.D. range listed in the preceding charts. Centrifugally cast pipe, classes 50-250 per ANSI/AWWA C102/A21.2; ANSI/AWWA C106/A21.6; ANSI/AWWA C108/A21.8, and Federal specification WW-P-421. Ductile iron pipe, classes 50-56 per ANSI/AWWA C151/A21.51; Cast iron O.D. PVC plastic pipe per AWWA C900.**The outside diameter of A-C pipe varies from manufacturer to manufacturer, to make certain you select the proper clamp: 1) Determine the O.D.of the pipe at the point of saddle installation; 2) From the pipe O.D. range column of the above chart,choose a saddle that has a pipe O.D. range that includes the determined pipe diameter.***For double stud single strap add "W" to above part numbers.