OS&Y RESILIENT WEDGE GATE VALVE WITH FLANGED ENDS 14-16"
OS&Y RESILIENT WEDGE GATE VALVE WITH FLANGED ENDS 14-16"
R-2361- 6
Sizes: 14”, 16”
FEATURES:
- UL 262 Listed and FM 1120/1130 Approved and certified to ANSI/NSF 61 & 372
- Iron body with Mueller® PRO-GARD® Fusion Bonded Epoxy Coated interior and exterior surfaces
- Outside Screw & Yoke (O.S.&Y.)
- Flanged end dimensions and drilling
- Rubber encapsulated iron wedge
- Adjustable packing
- Handwheel – open left or open right
- 250psig (1725 kPa/17 barg) maximum working pressure - 500 psig (3450 kPa/35 barg) static test
- Epoxy coating meets or exceeds all applicable requirements ANSI/AWWA C550
- Flanged end drilling complies with ASME/ANSI B16.1 Class 125
OPTIONS:
- Stainless steel fasteners: Type 304 or 316
- Stainless steel stem: Type 304 and Type 316
- ASTM B98-C66100/H02 stem
- EPDM disc and O-rings
- PN10/PN16 drilling
RESOURCES:
- Operating Manual
- Product Specifications
- Suggested Specifications
- Installation Preparation Checklist
- Submittal Drawing 1
- Brochure
- Certificate of Compliance
Dimension* | Size | ||||
4" | 6" | 8" | 10" | 12" | |
A | 23.63" | 30.00" | 37.37" | 47.00 | 53.50 |
AA | 18.94" | 23.22" | 28.60" | 35.75 | 40.50 |
E | 10.00" | 12.00" | 14.00" | 16.00 | 16.00 |
R | 9.00" | 11.00" | 13.50" | 16.00 | 19.00 |
FF | 9.00" | 10.50" | 11.50" | 13.00 | 14.00 |
UU | 7.50" | 9.50" | 11.75" | 14.25 | 17.00 |
FFF (number and size of holes) | 8--.75" | 8--.88" | 8--.88" | 12--1.00 | 12--1.00 |
Turns to open | 14 | 20.5 | 26.5 | 33 | 38.5 |
Weight (lbs.)* | 96 | 150 | 230 | 348 | 477 |
Catalog Part Number | Description | Material | Material Standard |
G-1 | Cap Nut | Bronze | ASTM B62 |
G-3 | Hand Wheel | Ductile Iron | ASTM A536 ▼ |
G-4 | Washer | Brass | ASTM B36 |
G-5 | Bush Nut | Bronze | ASTM B62 |
G-7 | Gland Nut | Bronze | ASTM B98 |
G-8 | Packing Gland | Ductile Iron | ASTM A536 ▼ |
G-10 | Gland Bolts | 316 Stainless steel | ASTM F593 |
G-16 | Bonnet Bolts and Nuts | 316 Stainless steel | ASTM F593 (bolt)/F594 (nut) |
G-23 | Stem Packing | Lubricated Flax | - |
G-206 | Guide Cap Bearings | Acetal | - |
G-209 | Wedge/Rubber Encapsulated | Ductile Iron** | ASTM A536 ▼ |
G-211 | Bonnet O-ring | Nitrile | ASTM D2000 |
G-212 | Body | Ductile Iron | ASTM A536 ▼ |
G-213 | Stem | Bronze | ASTM B138 |
G-215† | Bonnet | Ductile Iron | ASTM A536 ▼ |
G-216† | Yoke | Cast Iron | ASTM A536 ▼ |
G-217 | O-ring | Nitrile | ASTM D2000 |
G-218 | Disc Nut | Bronze | ASTM B584 |
G-219 | Stem Nut Pin | Stainless Steel | Type 304 |
+ Manufacturer's option to upgrade material to Ductile iron ASTM A536
▼ Material strength ASTM A536 65-45 minimum*** Per ANSI/AWWA C111, working pressure above 250psi requires the use of a special gasket rated for the higher pressure.