14-16 Inch A-USP1 RWGV SLxSL

public://uploads/product/a-usp1_14in_and_16in_slxsl_bw_img.png

14-16 Inch A-USP1 RWGV SLxSL

Catalog numbers:

- A-USP1-38 Slip-on† ends with gasket
- A-USP1-40 Slip-on† ends less gasket

Specifications:

Sizes – 14", 16"
Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to ANSI/NSF 61 & 372
Slip-on ends fit plain end of classes 50 and 100 cast iron; ductile iron and AWWA C905 cast iron O.D. PVC
Ductile iron body with nominal 10 mils Pro-Gard^® Fusion Bonded Epoxy Coating interior and exterior surfaces
Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
Ductile iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
Non-rising stem (NRS)
Triple O-ring seal (2 above the thrust collar and 1 below)
2" square wrench nut - open left or open right
250 psig (1725 kPa/17 barg) maximum working pressure, 500 psig (3450 kPa/35 barg) static test pressure
UL Listed, FM Approved – 250 psig (1725 kPa/17 barg)
Designed for potable water application

†Design and dimensions of the joint are manufactured under license of U.S. Pipe and Foundry Company.

Options*:

Position indicators
Spur or bevel geared actuator
Handwheel
Stainless Steel stem: Type 304, Type 316
Low zinc, silicon bronze ASTM B98-C66100/H02 stem
EPDM Disc and O-rings

*See Parts section below for more information on Resilient Wedge Gate Valve options.

· Add flyer 13816

· Add AUSP1 COC 14-24, attached

Resources:

Full Line Catalog

Sizes & Operation

Dimension	Nominal Size
Dimension	14"	16"
A	32.75	37.88
Q (bore)	14.38	16.00
W (distance between strapping lug holes across face of valve ends)	22.50	23.12
FF	24.42	25.32
L	6.00	6.00
DD	12.42	13.32
A - Spur Gear	40.49	43.58
A - Bevel Gear**	34.55	37.77
Turns to open (without gearing)	43.5	49
Turns to open (Spur gearing)	178	201
Turns to open (Bevel gearing)	174	196
Weight*	689	873

*All dimensions are in inches. All weights are in pounds and are approximate.
**Center line of operating nut to center line of valve.

Parts

Catalog Part Number	Description	Material	Material Standard
G-16	Bonnet Bolts & Nuts	316 Stainless Steel	ASTM F593 (bolt) ASTM F594 (nut)
G-41	Stuffing Box Bolts & Nuts	316 Stainless Steel	ASTM F593 (bolt) ASTM F594 (nut)
G-49	Stem O-rings (3)	Nitrile	ASTM D2000
G-200	Wrench Nut Cap Screw	316 Stainless Steel	ASTM F593
G-201	Stuffing Box O-ring	Nitrile	ASTM D2000
G-202	Wrench Nut	Cast Iron+	ASTM A126 CL.B
G-203	Stem	Bronze	ASTM B138
G-204	Hand Wheel (not shown)	Cast Iron+	ASTM A126 CL.B
G-205	Stem Nut	Bronze	ASTM B62
G-206	Guide Cap Bearings	Acetal	-
G-207	Stuffing Box	Ductile Iron	ASTM A536 ▼
G-208	Anti-friction Washers (2)	Acetal	-
G-209	Wedge, Rubber Encapsulation	Ductile Iron SBR*	ASTM A536 ▼ ASTM D2000
G-210	Bonnet	Ductile Iron	ASTM A536 ▼
G-211	Bonnet O-ring	Nitrile	ASTM D2000
G-212	Body	Ductile Iron	ASTM A536 ▼

Fully encapsulated in molded rubber with no iron exposed
+ Manufacturers option to change material to Ductile iron ASTM A536
▼ Material strength ASTM A536 65-45 minimum