2-12 Inch A-USP2 RWGV MJxMJ
2-12 Inch A-USP2 RWGV MJxMJ
Catalog numbers:
- A-USP2-20 Mechanical joint ends (with accessories unassembled)
- A-USP2-23 Mechanical joint ends (less accessories)
- A-USP2-25 Mechanical joint ends (with transition gaskets accessories unassembled)
Specifications:
- Sizes: 2", 3", 4", 6", 8", 10", 12"
- Meets or exceeds all applicable requirements of ANSI/AWWA C509 Standard, UL 262 listed, FM 1120/1130 approved, and certified to ANSI/NSF 61 & 372
- Standard mechanical joint ends comply with ANSI/AWWA C111
- Iron body with nominal 10 mils Pro-Gard® Fusion Bonded Epoxy Coated interior and exterior surfaces
- Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
- Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
- Non-rising stem (NRS)
- Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
- 2" square wrench nut - open left or open right
- 350 psig (1725 kPa/17 barg) maximum working pressure, 700 psig (3450 kPa/35 barg) static test pressure
- UL Listed, FM Approved: 350 psig (1725 kPa/17 barg)
- Designed for potable water applications
Options*:
- Position indicators
- Stainless steel stem: Type 304, Type 316
- ASTM B98-C66100/H02 stem
- Handwheel
- EPDM Disc and O-rings
Resources:
- Manual
- Installation Preparation Check List
- Suggested Specifications
- Product Specifications
- Submittal Drawing 1 (U7420)
- Submittal Drawing 2 (U7399)
- Certificate of Compliance
Dimension | Nominal Size | ||||||
2" | 3” | 4" | 6" | 8" | 10" | 12" | |
A | 9.88 | 12.38 | 14.9 | 18.00 | 21.50 | 25.50 | 28.62 |
FF | 8.50 | 9.62 | 10.00 | 11.60 | 12.68 | 14.88 | 15 |
L | 2.50 | 2.50 | 2.50 | 2.50 | 2.50 | 2.50 | 2.50 |
N | 4.62 | 7.50 | 9.12 | 11.12 | 13.37 | 15.62 | 17.88 |
O (number and size of holes) | 4--.88 | 4--.88 | 4--.88 | 6--.88 | 6--.88 | 8--.88 | 8--.88 |
DD | 3.50 | 4.62 | 5.00 | 6.60 | 7.68 | 9.88 | 10 |
Q | 2.30 | 3.30 | 4.30 | 6.30 | 8.30 | 10.30 | 12.30 |
OO (bolt circle diameter) | 4.75 | 6.19 | 7.50 | 9.50 | 11.75 | 14.00 | 16.25 |
Turns to open | 8 | 11 | 14 | 20.5 | 26.5 | 33.0 | 38.5 |
Weight* | 40 | 83 | 120 | 186 | 280 | 405 | 540 |
Catalog Part No. | Description | Material | Material Standard |
G-16 | Bonnet Bolts & Nuts | 316 Stainless Steel | ASTM F593 (bolt) ASTM F594 (nut) |
G-41 | Stuffing Box Bolts & Nuts | 316 Stainless Steel | ASTM F593 (bolt) ASTM F594 (nut) |
G-49 | Stem O-rings (3) | Nitrile | ASTM D2000 |
G-200 | Wrench Nut Cap Screw | 316 Stainless Steel | ASTM F593 |
G-201 | Stuffing Box O-ring | Nitrile | ASTM D2000 |
G-202 | Wrench Nut | Ductile Iron | ASTM A536 ▼ |
G-203 | Stem | Bronze | ASTM B138 |
G-204 | Hand Wheel (not shown) | Cast Iron | ASTM A126 CL.B |
G-205 | Stem Nut | Bronze | ASTM B584 |
G-206 | Guide Cap Bearings | Acetal | - |
G-207 | Stuffing Box with dirt seal** | Ductile Iron+++ Nitrile | ASTM A536 ▼ ASTM D200 |
G-208 | Anti-friction Washers (2) | Acetal | - |
G-209 | Wedge, Rubber Encapsulation | Ductile Iron* SBR | ASTM A536 ▼ ASTM D2000 |
G-210** | Bonnet | Ductile Iron | ASTM A536 ▼ |
G-211** | Bonnet O-ring ++ | Nitrile | ASTM D2000 |
G-212** | Body | Ductile Iron | ASTM A536 ▼ |
**Dirt seal on 4”-12” valves
▼ Material strength ASTM A536 65-45 minimum
+Manufacturer's option to change material to ductile iron ASTM A536
++2"-3" valves use a bonnet gasket
+++ 2"-3" stuffing boxes are cast iron ASTM A126 class B+