4-12 Inch A-USP2 RWGV SLxFL

- A-USP2-41 Slip-on end (with gasket) x flange end
- A-USP2-43 Slip-on end (less gasket) x flange end

Sizes – 4", 6", 8", 10", 12"
Meets or exceeds all applicable requirements of ANSI/AWWA C509, UL 262 Listed, FM 1120/1130 Approved, and certified to ANSI/NSF 61 & 372
Slip-on ends fit plain end of classes 150, 200 and 250 cast iron, ductile iron and classes 150 and 200 cast iron O.D. PVC
Flanged end drilling complies with ASME/ANSI B16.1 class 125 and B16.42 class 150
Iron body with nominal 10 mils Pro-Gard^® Fusion Bonded Epoxy Coated interior and exterior surfaces
Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron; Non-rising stem (NRS)
Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
2" square wrench nut (optional handwheel available) – open left or open right
250 psig (1725 kPa/17 barg) maximum working pressure, 500 psig (3450 kPa/35 barg) static test pressure
UL Listed, FM Approved: 250 psig (1725 kPa/17 barg)
Designed for potable water applications

††Field Lok is a trademark of U.S. Pipe and Foundry Company, used with permission.

*See Parts section below for more information on Resilient Wedge Gate Valve options.

Dimension	Nominal Size
Dimension	4"	6"	8"	10"	12"
A	14.19	18.00	21.50	25.50	28.62
Q (bore)	4.30	6.30	8.30	10.30	12.30
L	4.12	4.38	5.62	5.62	5.62
R	9.00	11.00	13.50	16.00	19.00
UU (bolt circle diameter for FL)	7.50	9.50	11.75	14.25	17.00
B (number and size of holes for FL)	8--.75	8--.88	8--.88	12--1.00	12--1.00
W (distance between strapping lug holes across face of valve ends)	8.62	10.62	13.12	16.38	18.12
FF	10.91	12.73	14.72	15.75	16.35
Turns to open	14	20.5	26.5	33	38.5
Weight*	98	152	244	366	489

*All dimensions are in inches. All weights are in pounds and are approximate.

*Fully encapsulated in molded rubber with no iron exposed
▼ Material strength ASTM A536 65-45 minimum