OS&Y RESILIENT WEDGE GATE VALVE WITH FLANGED ENDS 4-12"
OS&Y RESILIENT WEDGE GATE VALVE WITH FLANGED ENDS 4-12"
R-USP1: O.S.&Y. RESILIENT WEDGE GATE VALVE WITH FLANGE ENDS
Specifications:
- 4", 6", 8", 10" and 12" sizes
- UL 262 listed and FM 1120/1130 approved and certified to ANSI/NSF 61 & 372
- Iron body with Mueller® PRO-GARD® Fusion Bonded Epoxy Coated interior and exterior surfaces
- Outside Screw & Yoke (OS&Y)
- Adjustable packing
- Rubber encapsulated iron wedge
- Handwheel – open left or open right
- 350psig (2400 kPa/24 barg) maximum working pressure - 700psig (4800 kPa/48 barg) static test
- Epoxy coating meets or exceeds ANSI/AWWA C550
- Flanged end drilling complies with ASME/ANSI
B16.1 class 125 and B16.42 class 150*** - Meets or exceeds all applicable requirements of ANSI/AWWA C515
Options:
- Stainless steel stems: Type 304, 316, or 431
- ASTM B98-C66100/H02 stem
- PN10/PN16 drilling
- EPDM disc and O-rings
Resources:
Dimension* | Size | ||||
4" | 6" | 8" | 10" | 12" | |
A | 23.63" | 30.00" | 37.37" | 47.00 | 53.50 |
AA | 18.94" | 23.22" | 28.60" | 35.75 | 40.50 |
E | 10.00" | 12.00" | 14.00" | 16.00 | 16.00 |
R | 9.00" | 11.00" | 13.50" | 16.00 | 19.00 |
FF | 9.00" | 10.50" | 11.50" | 13.00 | 14.00 |
UU | 7.50" | 9.50" | 11.75" | 14.25 | 17.00 |
FFF (number and size of holes) | 8--.75" | 8--.88" | 8--.88" | 12--1.00 | 12--1.00 |
Turns to open | 14 | 20.5 | 26.5 | 33 | 38.5 |
Weight (lbs.)* | 96 | 150 | 230 | 348 | 477 |
Catalog Part Number | Description | Material | Material Standard |
G-1 | Cap Nut | Bronze | ASTM B62 |
G-3 | Hand Wheel | Ductile Iron | ASTM A536 ▼ |
G-4 | Washer | Brass | ASTM B36 |
G-5 | Bush Nut | Bronze | ASTM B62 |
G-7 | Gland Nut | Bronze | ASTM B98 |
G-8 | Packing Gland | Ductile Iron | ASTM A536 ▼ |
G-10 | Gland Bolts | 316 Stainless steel | ASTM F593 |
G-16 | Bonnet Bolts and Nuts | 316 Stainless steel | ASTM F593 (bolt)/F594 (nut) |
G-23 | Stem Packing | Lubricated Flax | - |
G-206 | Guide Cap Bearings | Acetal | - |
G-209 | Wedge/Rubber Encapsulated | Ductile Iron** | ASTM A536 ▼ |
G-211 | Bonnet O-ring | Nitrile | ASTM D2000 |
G-212 | Body | Ductile Iron | ASTM A536 ▼ |
G-213 | Stem | Bronze | ASTM B138 |
G-215† | Bonnet | Ductile Iron | ASTM A536 ▼ |
G-216† | Yoke | Cast Iron | ASTM A536 ▼ |
G-217 | O-ring | Nitrile | ASTM D2000 |
G-218 | Disc Nut | Bronze | ASTM B584 |
G-219 | Stem Nut Pin | Stainless Steel | Type 304 |
+ Manufacturer's option to upgrade material to Ductile iron ASTM A536
▼ Material strength ASTM A536 65-45 minimum*** Per ANSI/AWWA C111, working pressure above 250psi requires the use of a special gasket rated for the higher pressure.