2-8 INCH A-USP2 RWGV - RADxRAD
2-8 INCH A-USP2 RWGV - RADxRAD
Catalog number:
- A-USP2-37 radial compression ends
Specifications:
- Sizes – 2", 2-1/2", 3", 4", 6", 8"
- Meets or exceeds all applicable requirements of ANSI/AWWA C509, UL 262 Listed, FM 1120/1130Approved, and certified to ANSI/NSF 61 & 372
- Radial compression ends fit IPS PVC plastic pipe
- Ductile Iron body with nominal 10 mils MUELLER® Pro-Gard® Fusion Bonded Epoxy Coated interior and exterior surfaces
- Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard
- Iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron
- Non-rising stem (NRS)
- Triple O-ring seal (2 above the thrust collar and 1 below)
- 2” square wrench nut - open left or open right
- 350 psig (1725 kPa/217 barg) maximum working pressure; 700 psig (3450 kPa/35 barg) static test pressure
- UL Listed, FM Approved: 350 psig (1725 kPa/17 barg)
- Designed for potable water applications
Options:
- Position indicators
- ASTM B98-C66100/H02 stem
- Handwheel
Resources:
Dimension* | Nominal Size | |||||
2" | 2-1/2" | 3" | 4" | 6" | 8" | |
A | 9.88 | 12.38 | 12.38 | 14.19 | 19.00 | 21.50 |
FF | 10.25 | 10.75 | 11.75 | 13.43 | 15.91 | 18.40 |
L | 3.50 | 3.69 | 4.12 | 4.46 | 5.46 | 6.20 |
Q (bore) | 2.30 | 2.80 | 3.30 | 4.30 | 6.30 | 8.30 |
DD | 3.25 | 3.37 | 3.51 | 4.51 | 4.99 | 6.00 |
Turns to open | 8 | 11 | 11 | 14 | 20.5 | 26.5 |
Weight* | 35 | 65 | 67 | 96 | 155 | 260 |
Catalog Part No. | Description | Material | Material Standard |
G-16 | Bonnet Bolts & Nuts | Stainless Steel | Type 316 |
G-41 | Stuffing Box Bolts & Nuts | Stainless Steel | Type 316 |
G-49 | Stem O-rings (3) | Nitrile | ASTM D2000 |
G-200 | Wrench Nut Cap Screw | Stainless Steel | Type 316 |
G-201 | Stuffing Box with dirt seal ++ | Ductile Iron** Nitrile | ASTM A536 ▼ ASTM D2000 |
G-202 | Wrench Nut | Ductile Iron | ASTM A536 ▼ |
G-203 | Stem | Bronze | ASTM B138 |
G-204 | Handwheel (not shown) | Cast Iron + | ASTM A126 CL.B |
G-205 | Stem Nut | Bronze | ASTM B584 |
G-206 | Guide Cap Bearings | Acetal | - |
G-208 | Anti-friction Washers (2) | Acetal | - |
G-209 | Wedge, Rubber Encapsulation | Ductile Iron SBR* | ASTM A536 ▼ |
G-210** | Bonnet | Ductile Iron | ASTM A536 ▼ |
G-211** | Bonnet O-ring +++ | Nitrile | ASTM D2000 |
G-212** | Body | Ductile Iron | ASTM A536 ▼ |
▼ Material strength ASTM A536 65-45 minimum
+Manufacturer's option to change material to ductile iron ASTM A536
++ Dirt seal on 4"-12" valves
+++ 2"-3" valves use a bonnet gasket
** 2"-3" stuffing boxes are cast iron ASTM A126 class B+