4-12 Inch I-USP1 Tapping Valve MJxFL
4-12 Inch I-USP1 Tapping Valve MJxFL
I-USP1-16
I-USP1-19
Specifications:
- Flanged x Mechanical Joint Ends
- Indicator Post Style Stuffing box
- 2" Square Operating Nut
- With Mechanical Joint accessories+
- 4", 6", 8", 10" and 12" sizes
- UL 262 listed and FM 120/1130 approved specifications and certified to ANSI/NSF 61 & 372
- Ductile iron body and bonnet with nominal 10 mils Mueller® Pro-Gard™ Fusion Bonded Epoxy Coated interior & exterior surfaces
- Non-rising stem (NRS)
- Rubber encapsulated iron wedge
- 350 psig (2400 kPa/24 barg) maximum working pressure, 700 psig (2758 kPa) static test
- Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
- Epoxy coating meets or exceeds ANSI/AWWA C550 and complies with NSF-61 & 372
- Flanged end drilling complies with ANSI B16.1 class 125 and B16.42 class 150
Options:
- Position indicators
- Stainless steel stem: TYPE 304 and 316
- EPDM disc and o-rings
- Low zinc, silicon bronze ASTM B98-C66100/H02 stem
Dimension* | Size | ||||
4" | 6" | 8" | 10" | 12" | |
A | 14.19" | 18.00" | 21.50" | 25.50" | 28.62" |
C | 9.00" | 11.00" | 13.50" | 16.00" | 19.00" |
D | 5.00" | 7.00" | 9.00" | 11.00" | 13.00" |
E | 0.18" | 0.25" | 0.25" | 0.25" | 0.25" |
F | 6.24" | 6.75" | 7.50" | 8.44" | 7.38" |
J | 4.80" | 6.90" | 9.05" | 11.10" | 13.20" |
K | 9.12" | 11.12" | 13.38" | 15.68" | 17.94" |
O (number and size of holes for FL) | 8--.75" | 8--.88" | 8--.88" | 12--1.00" | 12--1.00" |
FF | 4.30" | 6.30" | 8.30" | 10.30" | 12.30" |
YY | 11.91" | 13.00" | 14.75" | 15.80" | 15.58" |
FFF (number and size of holes for MJ) | 4--.88" | 6--.88" | 6--.88" | 8--.88" | 8--.88" |
Turns to open | 14 | 20.5 | 26.5 | 33 | 38.5 |
Weight (lbs.)* | 117 | 172 | 265 | 399 | 529 |
*All dimensions are in inches. All weights are in approximate pounds.
Catalog Part No. | Description | Material | Material Standard |
G-16 | Bonnet Bolts & Nuts | 316 Stainless Steel | ASTM F593 (bolt)/ASTM F594 (nut) |
G-27 | Wrench Nut | Ductile Iron | ASTM A536 ▼ |
G-41 | Stuffing Box Bolts & Nuts | 316 Stainless Steel | ASTM F593 (bolt)/ASTM F594 (nut) |
G-49 | Stem O-rings (3) | Nitrile | ASTM D2000 |
G-152 | Stuffing Box | Ductile Iron | ASTM A536 ▼ |
G-200 | Wrench Nut Cap Screw | 316 Stainless Steel | ASTM F593 |
G-201 | Stuffing Box Seal | Nitrile | ASTM D2000 |
G-203 | Stem | Bronze | ASTM B138 |
G-205 | Stem Nut | Bronze | ASTM B584 Alloy C89833 |
G-206 | Guide Cap Bearings | Acetal | - |
G-208 | Anti-friction Washers (2) | Acetal | - |
G-209 | Wedge/ Rubber Encapsulated | Ductile Iron** | ASTM A536 ▼ |
G-210 | Bonnet | Ductile Iron | ASTM A536 ▼ |
G-211 | Bonnet Gasket | Nitrile | ASTM D2000 |
G-212 | Body | Ductile Iron | ASTM A536 ▼ |
+ MJ accessories are included and palletized separately from valves.
** Fully encapsulated in molded rubber with no iron exposed.
▼ Material strength ASTM A536 65-45 minimum.