4-12 Inch P-USP1 RWGV PIV FLxMJ
4-12 Inch P-USP1 RWGV PIV FLxMJ
Catalog numbers:
- P-USP1-16 (with M.J. Accessories+)
- P-USP1-19 (less M.J. Accessories)
Specifications:
- Flanged X mechanical joint ends
- Indicator Post Style Stuffing box
- 2" Square Operating Nut
- 4", 6", 8", 10" and 12" sizes
- UL 262 listed and FM 1120/1130 approved and certified to ANSI/NSF 61 & 372.
- Ductile iron body with Mueller® PRO-GARD® Fusion Bonded Epoxy Coated interior and exterior surfaces
- Non-rising bronze stem
- Rubber encapsulated iron wedge, no iron exposed
- 350psig (2400 kPa/24 barg) maximum working pressure, 700psig (4800 kPa/48 barg) static test pressure
- Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
- Epoxy coating meets or exceeds ANSI/AWWA C550
- Flanged end drilling complies with ASME/ANSI B16.1 Class 125
- Meets or exceeds all applicable requirements of ANSI/AWWA C515
Options:
- Stainless steel stems: Type 304 and Type 316
- ASTM B98-C66100/H02 stem
- EPDM disc and O-rings
Resources:
Dimension* | Size | ||||
4" | 6" | 8" | 10" | 12" | |
A | 14.19 | 18.00 | 21.50 | 25.50 | 28.62 |
R | 9.00 | 11.00 | 13.50 | 16.00 | 19.00 |
FF | 9.50 | 11.06 | 12.09 | 13.94 | 14.50 |
E | 12.00 | 12.00 | 12.00 | 12.00 | 12.00 |
UU (bolt circle for FL) | 7.50 | 9.50 | 11.75 | 14.25 | 17.00 |
Q (bore) | 4.30 | 6.30 | 8.30 | 10.30 | 12.30 |
OO (bolt circle for MJ) | 7.50 | 9.50 | 11.75 | 14.00 | 16.25 |
N | 9.12 | 11.12 | 13.37 | 15.62 | 17.88 |
L | 2.50 | 2.50 | 2.50 | 2.50 | 2.50 |
B (number and size of holes for FL) | 8--.75" | 8--.88" | 8--.88" | 12--1.00" | 12--1.00" |
O (bolt circle diameter for MJ) | 4--.88" | 6--.88" | 6--.88" | 8--.88" | 8--.88" |
Turns to opem | 14 | 20.5 | 26.5 | 33 | 38.5 |
Weight (lbs.)* | 120 | 172 | 264 | 397 | 522 |
Catalog Part Number | Description | Material | Material Standard |
G-16 | Bonnet Bolts & Nuts | 316 Stainless Steel | ASTM F593 (bolt)/ASTM F594 (nut) |
G-27 | Wrench Nut | Ductile Iron | ASTM A536 ▼ |
G-41 | Stuffing Box Bolts and Nuts | 316 Stainless Steel | ASTM F593 (bolt)/ASTM F594 (nut) |
G-49 | Stem O-rings (3) | Nitrile | ASTM D2000 |
G-152 | Stuffing Box | Ductile Iron | ASTM A536 ▼ |
G-200 | Wrench Nut Cap Screw | 316 Stainless Steel | ASTM F593 |
G-201 | Stuffing Box with dirt seal | Nitrile | ASTM D2000 |
G-203 | Stem | Bronze | ASTM B138 |
G-205 | Stem Nut | Bronze | ASTM B584 |
G-206 | Guide Cap Bearings | Acetal | - |
G-208 | Anti-friction Washers (2) | Acetal | - |
G-209 | Wedge/Rubber Encapsulated | Ductile Iron** | ASTM A536 ▼ |
G-210 | Bonnet | Ductile Iron | ASTM A536 ▼ |
G-211 | Bonnet O-ring | Nitrile | ASTM D2000 |
G-212 | Body | Ductile Iron | ASTM A536 ▼ |
**Fully encapsulated in molded rubber with no iron exposed.
▼ Material strength ASTM A536 65-45 minimum
^ Per ANSI/AWWA C111 working pressure above 250psi requires the use of a special gasket rated for higher pressure.