1. Home
  2. Products
  3. Gate Valves (U.S. Pipe®)
  4. Non-Rising Stem (NRS)
  5. 3-12 Inch A-USP1 RWGV FLxFL

3-12 Inch A-USP1 RWGV FLxFL

public://uploads/a-2361-flxfl-handwheel-850px.png

3-12 Inch A-USP1 RWGV FLxFL

Catalog number: A-USP1-6 flanged ends
 

Specifications:

  • Sizes – 3", 4", 6", 8", 10", 12"
  • Meets or exceeds all applicable requirements of ANSI/AWWA C515*** Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to ANSI/NSF 61 & 372
  • Flanged end drilling complies with ASME/ANSI B16.1 Class 125
  • Iron body with nominal 10 mils Pro-Guard® Fusion Bonded Epoxy Coated interior and exterior surfaces
  • Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
  • Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
  • Non-rising stem (NRS)
  • Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
  • 2" square wrench nut – open left or open right 
  • 350 psig (2400 kPa/24 barg) maximum working pressure, 700 psig (4800 kPa/48 barg) static test pressure
  • UL Listed, FM Approved: 350 psig (2400 kPa/24 barg)
  • Designed for potable water applications
† Approved for backflow prevention devices by USC (for 4" - 10" sizes)

Options:*

  • Position Indicators
  • Stainless steel stem: Type 304, Type 316
  • Low zinc, silicon bronze ASTM B98-C66100/H02 stem
  • 2" square wrench nut
  • P/N 10/16 Drilling
  • EPDM Disc and O-rings
*See Parts section below for more information on Resilient Wedge Gate Valve options.

Resources:

 

Full Line Catalog

Dimension

Nominal Size

3"

4"

6"

8"

10"

12"

A

12.38

14.19

18.00

21.50

25.50

28.62

E

8.00

11.00

13.00

14.00

16.00

16.00

R

7.50

9.00

11.00

13.50

16.00

19.00

FF

8.00

9.00

10.50

11.50

13.00

14.00

Q (bore)

3.30

4.30

6.30

8.30

10.30

12.30

UU (bolt circle diameter)

6.00

7.50

9.50

11.75

14.25

17.00

B (number and size of holes)

4--.75

8--.75

8--.88

8--.88

12--1.00

12--1.00

Turns to open

11

14

20.5

26.5

33

38.5

Weight*

73

81

136

213

326

440

*All dimensions are in inches. All weights are in pounds and are approximate.

Catalog Part No.

Description

Material

Material Standard

G-16

Bonnet Bolts & Nuts

316 Stainless Steel

ASTM F593 (bolt) ASTM F594 (nut)

G-41

Stuffing Box Bolts & Nuts

316 Stainless Steel

ASTM F593 (bolt) ASTM F594 (nut)

G-49

Stem O-rings (3)

Nitrile

ASTM D2000

G-200

Wrench Nut Cap Screw

316 Stainless Steel

ASTM F593

G-201

Stuffing Box O-ring

Nitrile

ASTM D2000

G-202

Wrench Nut

Ductile Iron

ASTM A536 ▼

G-203

Stem

Bronze

ASTM B138

G-204

Hand Wheel

Cast Iron

ASTM A126 CL.B

G-205

Stem Nut

Bronze

ASTM B584

G-206

Guide Cap Bearings

Acetal

-

G-207

Stuffing Box with dirt seal ++

Ductile Iron Nitrile▼▼

ASTM A536 ▼ ASTM D2000

G-208

Anti-friction Washers (2)

Acetal

-

G-209

Wedge, Rubber Encapsulation

Ductile Iron* SBR

ASTM A536 ▼ ASTM D2000

G-210

Bonnet

Ductile Iron

ASTM A536 ▼

G-211

Bonnet O-ring +++

Nitrile

ASTM D2000

G-212

Body

Ductile Iron

ASTM A536 ▼

++Dirt seal on 4"-12" valves
+++ 3" valves use a bonnet gasket
* Fully encapsulated in molded rubber with no iron exposed
▼ Material strength ASTM A536 65-45 minimum
** Per ANSI/AWWA C111 working pressure above 250psi requires the use of a special gasket rated for higher pressure.
▼▼ 3" stuffing boxes are cast iron ASTM A126 class B+
*** 3" valves meet or exceed all applicable requirements of ANSI/AWWA C509 Standard