550 Series Xtra-Range Full-Seal All Stainless Steel Pipe Repair Clamps

550 Series Xtra-Range Full-Seal All Stainless Steel Pipe Repair Clamps

550 Series Xtra-Range Full-Seal All Stainless Steel Pipe Repair Clamps - for 3" through 12" cast iron, ductile iron steel pipe, A-C and PVC pipe.

Full Line Catalog

Standard Lengths: 7-1/2", 10", 12-1/2", 15", 20", 30"

Nominal Pipe SizeClamp size- numberClamp O.D. range*Cast IronDuctile IronCast Iron O.D. PVCSteel***A-C Rough Barrel
InchesMillimeters
Min.MaxMin.Max
3"3493.494.2988.6109.0-----
4"4444.445.24112.8133.1-----
4"4744.745.57120.4141.550-250,A, B, C, DAllClass150,200-Class 100**, 150, 200
6"6626.627.42168.1188.5---STD-
6"6846.847.64173.7194.750-250,A, B, C, DAllClass150,200-Class 100**, 150, 200
8"8628.629.42218.9293.3---STD-
8"8998.999.79228.3248.750-250,A, B, C, DAllClass150,200-Class 100**, 150, 200
10"107510.7511.55273.0293.4-----
10"111011.1011.90281.9302.350-250,A, B, C, DAllClass150,200-Class 100**
10"116011.6012.40294.6315.0----Class150,200
12"127512.7513.55323.8344.2-----
12"132013.2014.00335.3355.650-250,A, B, C, DAllClass150,200-Class 100**
12"136513.6514.45346.7367.0----Class 100**, 150, 200
12"140014.0014.80355.6375.9-----
*Verifypipe O.D. before selecting clamp size.
**CAUTION—O.D. of class 100A-C pipe varies greatly. Measure pipe O.D. to assure proper clamp selection.
Note: For O.D. not shown contact our Customer Service Center or your Mueller Sales Representative.

To specify the catalog number, provide the following information:

  • Style number—550
  • Length—Standard length available (inches): 7-1/2, 10, 12-1/2, 15, 20, 30
  • Size number—from chart onpage 15.20
  • Catalog number prefix for optional features, if desired.

The catalog number fora 550 Xtra-Range Full-Seal Repair Clamp, 12" long for 6" cast iron pipe is 550-12-684.

Clamp style number

Clamp length

Clamp size number

550

12

684

Extra Nuts and Washers for Mueller Xtra-Range Full Seal All Stainless Repair Clamps

Clampsize

Bolt size

Bolt partnumber

Nut partnumber

3"-12" (standard nut)

5/8"

311581

311582

Deep socket wrenches

Specially designed for use with Mueller Full-Seal Repair Clamps. Long ratchet handle has thumb-tip reverse. Deep sockets (3-1/4") have double hex (12 pt.) and 1/2" square drive.

Part number

Description

515204

15-3/4" with reversible ratchet handle

515207

1-1/16" socket for 2" and larger clamps

Bonding device for cathodic protection

          

Metallic conductors are set in the gasket to provide contact between the band and the pipe surface and are available on all 500 series clamps. These conductors permit electrical current flow by establishing positive contact with pipe and band on each side of the pipe crack or break.

To specify optional bonding device for cathodic protection, add a prefi of “2” to catalog number.

Example: 2-550-12-684.

Add-on feature allows longlengthwise repairs

The gasket is cemented into the band in a 1" offset position. This allows overlapping the gasket with the band of another offset clamp when repairing a longer than usual area of pipe. This feature is not available on Servi-Seal style clamps.

To specify optional add-on feature for longer than usual repairs, add a prefi of “1” to catalog number.

Example: 1-550-12-684.